Configuring your Chat Settings in Source-Nexus Gateway
This article is part of the Source-Nexus Gateway User Guide
Both the hosts of a streaming session and regular participants can configure settings before entering the session, including audio and video settings, and the display name and passkey (host-only), and after joining, using the gears icon.
Source-Nexus Gateway - Host Settings
After logging into the Source-Nexus Gateway, hosts reach a “Chat Settings” screen with the following settings:
- Display name: the name displayed in the participants list to other users in the broadcast. This will not have an impact on the display name you have configured in the user dashboard.
- Camera: the video device to be used as a camera during your broadcast.
- Microphone: the audio device used as a microphone, for your users to hear you.
- Use original audio (HQ): enable original audio for high-quality stereo audio (mono only when using Source-Nexus Free). It is recommended to use headphones to prevent audio feedback.
- Speaker: the audio device to be used to hear back any sound from the broadcast.
- Test button: the test button will play a sound to ensure that the speakers are correctly configured.
Clicking on the “Show All Settings” enables the following additional settings:
-
Audio
- Microphone: the audio device used as a microphone, for your users to hear you.
- Microphone fader. When “Use original audio (HQ)” is on, you will see an “HQ” indicator next to the microphone fader.
- Speaker: the audio device to be used to hear back any sound from the broadcast.
- Test button: the test button will play a sound to ensure that the speakers are correctly configured.
-
Use original audio (HQ): enable original audio for high-quality stereo audio (mono only when using Source-Nexus Free). It is recommended to use headphones to prevent audio feedback.
- Stereo Audio. A checkbox allowing you to turn on stereo audio when using the original audio.
-
Max Audio bitrate: the bitrate to be used in the outgoing audio:
- When sending mono audio out, the options will be:
- Good / 64kbps / mono
- High / 96kbps / mono
- Great / 128 kbps / mono (default)
- Top / 160 kbps / mono
- Best / 256 kbps / mono
- When sending stereo audio out, the options will be:
- Good / 128 kbps / stereo
- High / 192 kbps / stereo
- Great / 256 kbps / stereo (default)
- Top / 320 kbps / stereo
- Best / 512 kbps / stereo
- When sending mono audio out, the options will be:
- Push to talk: shows or hides the “Push spacebar to talk” (push-to-talk or talkback mode) button during broadcasts. This will allow your connection partner(s) to hear you, and is an alternative to manually clicking the mute button.
- Sound notifications: mutes/unmutes any notifications received during the broadcast (for example, instant messages).
-
Video
- Camera: the video device to be used as a camera during your broadcast.
- Mirror self video: horizontally mirrors your video when enabled.
- Allow picture-in-picture: toggle it on/off to watch your Source-Nexus Gateway session on a floating window.
-
General
- Display name: the name displayed in the participants list to other users in the broadcast. This will not have an impact on the display name you have configured in the user dashboard.
- Enter the new pass key: allows broadcasters to set a new passkey before or during broadcasts. The passkey must have a minimum of 4 alphanumeric characters and up to 50.
- Change the pass key button: confirms the new passkey. Closing the Chat Settings window without clicking it will not save the new value.
Source-Nexus Gateway - Viewer Settings
After logging into the Source-Nexus Gateway, hosts reach a “Chat Settings” screen with the following settings:
- Display name: the name displayed in the participants list to other users in the broadcast. This will not have an impact on the display name you have configured in the user dashboard.
- Camera: the video device to be used as a camera during your broadcast.
- Microphone: the audio device used as a microphone, for your users to hear you.
-
Use original audio (HQ): enable original audio for high-quality stereo audio (mono only when using Source-Nexus Free). It is recommended to use headphones to prevent audio feedback.
- Stereo Audio. A checkbox allowing you to turn on stereo audio when using the original audio.
-
Max Audio bitrate: the bitrate to be used in the outgoing audio:
- When sending mono audio out, the options will be:
- Good / 64kbps / mono
- High / 96kbps / mono
- Great / 128 kbps / mono (default)
- Top / 160 kbps / mono
- Best / 256 kbps / mono
- When sending stereo audio out, the options will be:
- Good / 128 kbps / stereo
- High / 192 kbps / stereo
- Great / 256 kbps / stereo (default)
- Top / 320 kbps / stereo
- Best / 512 kbps / stereo
- When sending mono audio out, the options will be:
- Speaker: the audio device to be used to hear back any sound from the broadcast.
- Test button: the test button will play a sound to ensure that the speakers are correctly configured.
Clicking on the “Show All Settings” enables the following additional settings:
-
Audio
- Microphone: the audio device used as a microphone, for your users to hear you.
- Microphone fader. When “Use original audio (HQ)” is on, you will see an “HQ” indicator next to the microphone fader.
- Speaker: the audio device to be used to hear back any sound from the broadcast.
- Test button: the test button will play a sound to ensure that the speakers are correctly configured.
- Use original audio (HQ): enable original audio for high-quality stereo audio (mono only when using Source-Nexus Free). It is recommended to use headphones to prevent audio feedback.
- Push to talk: shows or hides the “Push spacebar to talk” (push-to-talk or talkback mode) button during broadcasts. This will allow your connection partner(s) to hear you, and is an alternative to manually clicking the mute button.
- Sound notifications: mutes/unmutes any notifications received during the broadcast (for example, instant messages).
-
Video
- Camera: the video device to be used as a camera during your broadcast.
- Mirror self video: horizontally mirrors your video when enabled.
- Allow picture-in-picture: toggle it on/off to watch your Source-Nexus Gateway session on a floating window.
-
General
- Display name: the name displayed in the participants list to other users in the broadcast. This will not have an impact on the display name you have configured in the user dashboard.
Table of Contents