How to configure Source-Connect Studio/Facility to send RTS via LTC and Logic Pro to send LTC

Follow the instructions below: 

1. In Source-Connect, click the “Send” button - it will turn green.
2. In “TIME REFERENCE INPUT”, select “LTC” and “Source-Nexus A” as your input device.
   
3. Select the appropriate FPS for your Logic Pro setting. By default, all projects will be set to 25FPS.
   
4.  On Logic Pro, go to Settings > MIDI.
   
5. Under “Inputs”, make sure that at least “IAC Driver Logic Pro” is checked. You might have other inputs in the list - make sure the one you want to use is selected.
   
6. In Logic, switch to the “Sync” tab. Configure the MIDI output delay, pickup delay, and other settings you might want to customize.
   
7. In the “Sync” menu, click “MIDI Sync Project Settings”. By default, you will see Synchronization > MIDI open up. Check the “Clock” box and the “MTC” boxes if you want to send timecode in MTC. Make sure you select the clock mode you want - you can find more information on each clock mode in the Logic knowledge base.
   
8. On the Logic main screen, click the dropdown arrow to chang the Display Mode to “Time”:
   
9. Add Source-Nexus as an insert on the track where your LTC timecode is. For this example, we have dropped a sample LTC timecode in 25fps:
   
10. Connect to your connection partner. 
11. Play the timecode in Logic Pro.

In the example below, Logic Pro is sending timecode using “Logic Pro Virtual In”, which is visible in the RTS tab of Source-Connect 4. User “Armel” is sending the RTS timecode: 

The talent (Amber, who is on Source-Connect Studio) is receiving the timecode: