How to configure Source-Connect Studio/Facility to receive RTS via LTC and Logic Pro to receive LTC

Follow the instructions below:

1. In Source-Connect, click the “Receive” button - it will turn blue.
2. In “TIME REFERENCE OUTPUT”, select “LTC” and “Source-Nexus A” as your output device.
   
3.  On Logic Pro, go to Settings > MIDI.
   
4. Under “Inputs”, make sure that at least “IAC Driver Logic Pro” is checked. You might have other inputs in the list - make sure the one you want to use is selected.
   
5. In Logic, switch to the “Sync” tab. Configure the MIDI output delay, pickup delay, and other settings you might want to customize.
   
6. In the “Sync” menu, click “MIDI Sync Project Settings”. By default, you will see Synchronization > MIDI open up. Check the “Clock” box and the “MTC” boxes if you want to send timecode in MTC. Make sure you select the clock mode you want - you can find more information on each clock mode in the Logic knowledge base.
   
7. On the Logic main screen, click the dropdown arrow to chang the Display Mode to “Time”:
   
8. Connect to your connection partner. 
9. Once they are ready, have them play the timecode in Logic Pro.