How to configure Source-Connect Studio/Facility to send RTS via MTC and Cubase/Nuendo to send MTC

Follow the instructions below: 

1. In Source-Connect, click the “Send” button - it will turn blue. 
2. In “TIME REFERENCE INPUT”, select “MTC” and the name of your MIDI device ("Network DAW MTC/MMC Send").
3. Select the appropriate FPS. 
   
4. In Cubase/Nuendo, go to Transport > Project Synchronization settings:
   1. Under “Sources”:
      
      1. Click “Activate External Sync”.
      2. In “Timecode Source”, click “Internal Timecode”.
   2. In “Destinations” > “MIDI Timecode Destinations”:
      
      1. Click the network driver you had created (in our case, “Network DAW MTC/MMC Send”).
      2. Check the box next to “MIDI Timecode Follows Project Time”.
   3. Under “Machine Control”:
      
      1. In “Machine Control Output Settings”, check “MMC Master Active”. Under “MIDI Output”, select “Network DAW MTC/MMC Send”.
5. Once you are ready, go back to “Sources”, click “Start” under “Transport Start/Stop”. You will see the play button at the bottom of the screen go green.
   

In the example below, Cubase/Nuendo is sending timecode using “Network DAW MTC/MMC Send”, which is visible in the RTS tab of Source-Connect 4. User “Amber” is sending the RTS timecode: 

The talent (Eveline, who is on Source-Connect Talent) is receiving the timecode: