This article explains how to use the Source-Nexus Suite alongside Twisted Wave to host clients in a web meeting room, record yourself locally, and share live audio and playback with your clients simultaneously.

Overview

This setup allows you to:

• Record yourself in Twisted Wave while sending your live microphone to connected clients
• Play back audio from Twisted Wave so clients can hear it in real time
• Monitor yourself through your audio interface (not through Twisted Wave) to avoid latency

The key components are: Source-Nexus Review (standalone app), Source-Nexus Gateway (browser-based), and Twisted Wave.

Step-by-Step Setup

1. Open the standalone Source-Nexus Review application on your Mac.
2. Set the Output of Source-Nexus Review to your headphones.
3. Set the Input of Source-Nexus Review to Source-Nexus A.
4. Set the Output of Twisted Wave to Source-Nexus A.
5. In Source-Nexus Review, select your microphone as the talkback mic and click the talkback button so it latches open. Do not monitor yourself through Twisted Wave — use your audio interface's direct monitoring instead to keep latency low.
6. In Chrome, go to https://nexus.source-elements.com/ and log in using your Source Elements account. When prompted, select a client passkey. The default settings are correct for this workflow: Mic To Source-Nexus Chat, Speakers From Chat, and Broadcast Input To Source-Nexus Broadcast.
7. Once inside the Gateway, click "Start Broadcast" (top right). This allows your clients to hear playback from Twisted Wave.
8. Use the Invite button (bottom left) to send clients a link to your Source-Nexus Gateway room. The invite link follows this format: https://nexus.source-elements.com/<your-username> — share it along with the passkey.

Notes

• Clients join via browser — no software installation is required on their end.
• If you have questions about a specific part of this workflow, contact support at [email protected].